Categories

Peat stacker AMKODOR 30

The machine is designed for transshipment of milling peat in stacks (caravans) from bulk, formed after unloading milling peat from bins of collecting machines. The machine can also be used to move a self-heating stack to cool it.
The working element of the machine is a scraper self-tug, installed obliquely to the surface of the deposit, and located on the side of the machine. The design of the working element makes it possible to fold the horizontal and inclined frames together or to place them in the same plane, with an angle of inclination to the horizon 42°, thus ensuring the height of the stack to be up to 8 m.
Together with the machine, a device is supplied for refilling with the oil in the field, which prevents the peat dust from entering the hydraulic system and, consequently, from damaging expensive hydraulics. For the same purpose, a filter with replaceable cartridges is installed in the hydraulic system tank. The control of all units of the machine and power plant is remote and is carried out from the operator's cab.

Information:

Manual (RUS) download

30

Specifications:
AMKODOR 30
Type of running device
caterpillar drive
Engine model
ММЗ Д-243
Nominal power, kW
59,6 (2200 rpm)
Transmission type
hydrostatic
Maximum speed
- operating (forward, back)
1, 35
- Maximum transport speed, not less than:
4,0
Stack height, m
8
Operating productivity, m3/h
850
Change of boom angle in relation to support surface
0-60°
Average holders' pressure on ground, MPa
0,28
scraper conveyor
Dimensions in transport position, self-tug in lower / upper position, mm:
- length
5500
- width
23300 / 21250
- height
4000 / 9600
- gauge (by troughs of tension wheels)
2400
- Base (by the axes of the tension and drive wheels)
4050
- clearance
350
Operating weight, kg
16000
Counterweight (crushed stone), kg
3310
More

Interchangeable working equipment