Categories

Milling drum AMKODOR АТФ-10

Milling drum ATF-10 is designed for milling a peat deposit with a milling method of peat extraction. The drum should be operated on peat fields prepared in accordance with the current "Regulations of technical exploitation of peat industry enterprises".
The working part of the drum is 6 mills with conical pins. The lifting of the working element to the transport position is carried out by the hydraulic system. The drum is equipped with an electric control system for stopping the mills. During normal operation of the milling cutter, no actuations occur. If, during the milling operation, jamming occurs due to stumps, driftwood or other objects, the milling cutter will stop and the sensor will operate with a shutter speed of 2 sec. in the form of sound and light signal on the panel located in the cabin. The jamming alarm of the milling cutters is triggered on any of the three installed sensors, depending on where the jam occurred.

Information:

Manual (RUS) download

10_1 10_2

Specifications:
AMKODOR АТФ-10
Aggregating vehicle
Tractor of class 2 or higher
Productivity, ha/h
4,0
Mill diameter, mm
220
Mill capture width, mm
9800
Operating speed, km/h
5,0
Milling depth, mm
5÷20
Minimum turning radius, m
6,0
Nominal pressure to the ground, MPa
0,04
Overall dimensions LxWxH ,mm
3850x10100x1100
Weight, kg
3200

Interchangeable working equipment